Coloured concrete in the City of Melton
Updated November 2026
Coloured concrete can make a driveway or patio look like part of the house. It also comes with one City of Melton condition to plan around: on most streets, colour stops at your boundary. Melton City Council's crossover policy says crossovers must be plain concrete or match the existing footpath where a footpath is present or likely to be built. So a charcoal driveway usually meets a plain grey crossover at the boundary line. We pass your request to a local concreter who works your suburb. We are a referral service, not a concreting business.
Ways to colour concrete
- Through-colour oxide batched into the whole mix. The most durable option for driveways, because chips and wear still show colour.
- Colour hardener worked into the fresh surface, often with stencilled or stamped patterns.
- Stains and coloured toppings for renewing an existing, sound slab.
- Coloured cement in an exposed aggregate mix, tinting the matrix around the stone.
What coloured concrete costs
Guide pricing only. Published 2026 ranges for greater Melbourne put coloured concrete at around $95 to $200 per square metre laid, against $75 to $150 for plain grey. Darker and premium oxides cost more. The crossover is often priced separately in plain concrete. The ranges were not re-surveyed for the City of Melton and the sources do not say whether GST is included. Get a fast quote.
Choosing a colour
Colour reads differently in a small sample and on a whole driveway. Wet concrete looks darker than cured concrete. And the colour sits next to a plain grey crossover, so pick a tone that works beside it. Mid greys and charcoal sit easily beside plain grey. Warm buff and sandstone tones suit brick homes in the township streets but contrast more with the crossover. Ask the concreter for a cured sample panel.
Some developments have a Housing Design Guideline endorsed under the planning scheme, and it may cover driveway appearance as well as crossover width. Check before you order.
Getting even colour
Every load needs the same oxide dose, and pour joins should fall on control joints. Curing needs to be even, because patchy curing, hot wind or early rain can leave blotches. Expect the crew to cure promptly and to move the pour if rain is forecast.
The slab under the colour
Colour is a surface choice. Base, steel and joints decide whether the slab cracks, and on the basalt clays of Melbourne's west those need to suit seasonal ground movement. A crack shows more on colour than on plain grey, so spend on the hidden work first.
Looking after it
Seal after curing and reseal every few years. Good oxides are UV stable but soften slowly in the sun. Charcoal shows dust and efflorescence more than mid greys.
Permits
Ask the concreter whether your job needs a permit or a registered builder. Building permit requirements in Victoria are set by the Building Regulations 2018 and applied by councils and registered building surveyors. Check the concreter's insurance before you sign.
Ready to compare colours? Get a fast quote.
Frequently asked questions
Can the crossover be coloured to match?
Usually not where a footpath exists or is likely. The council's policy requires plain concrete or a match to the existing footpath.
Will colour hide old stains on my driveway?
A stain or topping can renew a sound slab. If it is cracked from movement, fix that first. See concrete repairs.
Is a dark driveway hot?
Dark colours absorb more heat. For bare-foot areas and pool surrounds, lighter tones are more comfortable.
Does coloured concrete fade?
Slowly. Quality oxides and regular resealing keep it looking good for years.