Updated November 2026
Toolern Vale is the acreage country north of Kurunjang and Harkness. Fewer than a thousand people lived there at the 2021 Census, nearly all in separate houses on rural lots, with a median age of 44 and most homes owner-occupied. The concrete work here is a different product from the estates: big shed slabs, long driveways, turning circles for trucks and floats, and pads for tanks and pumps.
Melton Concreting does not pour concrete. Your request goes to a local concreter who works Toolern Vale.
What gets poured in Toolern Vale
- Machinery, hay and workshop shed slabs, often with thickened edges
- Long driveways, concreted on the slopes or near the house with gravel beyond
- Truck, float and caravan hardstands
- Tank and pump pads
- Rural crossovers from the road
- Paths and patios around the house
Before you book
Loads. Tell the concreter what will drive or sit on each slab, because a tractor or loaded truck needs a much heavier slab than a ute.
Access. A loaded concrete truck is heavy. On a soft track or a wet paddock it can bog or damage the ground, so a dry spell, a pump or improving the track first may be the answer.
Crossovers. A new or changed crossover needs written approval from Melton City Council, and consent before working in the road reserve. Rural crossovers can involve roadside drains, so raise it early.
Underground. Locate private water lines and any on-site wastewater system before excavation, and lodge a free Before You Dig Australia (BYDA) enquiry.
Price guide for Toolern Vale
Guide ranges for greater Melbourne put plain concrete at around $75 to $150 per square metre laid. Large open shed floors often price well per metre, while distance, thickened edges, rock in the dig and long driveway runs add cost. Ask whether GST is included. See the cost guide.
A large shed slab is often part of a building permit. Ask the concreter or a registered building surveyor what applies, and check the concreter's insurance.
Frequently asked questions
Concrete the whole driveway or part of it?
Many acreage owners concrete the steep, busy or turning sections and near the house, and keep compacted gravel for the long straight run.
How thick should a machinery shed slab be?
It depends on the heaviest load. An engineer often designs slabs for trucks or heavy machinery.
Nearby, we also cover Kurunjang, Harkness and Diggers Rest.