Commercial concreting in the City of Melton
Updated November 2026
Commercial concreting in the City of Melton follows the growth. New town centres, schools, childcare centres, medical suites and shops need car parks and footpaths. Townhouse developments need common driveways. Rural properties at Toolern Vale, Diggers Rest and Eynesbury need hardstands and shed floors. Each job runs to a specification rather than a rule of thumb. We pass your request to a local concreter who works at commercial scale in the area. We are a referral service, not a concreting business.
Work we get asked about
- Car parks and access roads for retail, medical, childcare and community sites
- Warehouse, workshop and storage slabs, including machine bases
- Hardstands and yards for trucks and equipment
- Footpaths, kerb and channel and vehicle crossovers to council standards
- Owners corporation driveways, paths and repairs
- Rural hardstands, wash bays and machinery shed floors
- Repairs to cracked or sunken commercial pavements
Pricing
Commercial work is priced from drawings. As a reference point, published 2026 rates for plain concrete in greater Melbourne sit around $75 to $150 per square metre laid, and large pours usually get better rates than small residential work. Engineering, steel, mix strength, pumping, traffic management and out-of-hours work all move the figure. Send plans with the request and get a fast quote. Ask for the GST position to be stated.
Council approvals
Vehicle crossovers on commercial and multi-unit sites come under Melton City Council's crossover policy, as published. It requires written approval for a new or modified crossover, limits accessway width relative to the street frontage, and sets clearances, including 6.0 metres at the kerb between two crossovers on one property and 0.75 metres to drainage pits. Where a footpath is present or likely, the crossover must be plain concrete or match the footpath. Works in the road reserve need a separate application, lodged at least ten working days before the works. The policy has a review date that has passed, so ask the contractor to check the current version.
Planning permit conditions often set pavement, parking and stormwater requirements on commercial sites. Include the permit and endorsed plans with your request.
Ground and design
Engineers who have studied the basalt clays of Melbourne's west describe seasonal shrinking and swelling that can damage light structures and buried infrastructure. A commercial pavement design will take the subgrade into account, and an engineer sets the thickness, sub-base, reinforcement and joint layout. Rock in the ground on basalt country can affect excavation and service trenches.
How commercial jobs run
- Engineering first. Thickness, steel, joints and strength come from the design.
- Documentation. Delivery dockets and test results where the specification calls for them.
- Programming. Pours scheduled around trades, tenants and traffic.
- Site safety. Safe work method statements, inductions and traffic control as needed.
- Finish to suit use. Burnished floors inside, broom finish for ramps and car parks.
Owners corporations
For common property in a townhouse group, the owners corporation manager will want insurance certificates, a written scope and an access plan. Shared driveways are often poured in stages so residents keep access. Ask the concreter for the paperwork up front.
Registration and insurance
Building permit requirements in Victoria are set by the Building Regulations 2018 and applied by councils and registered building surveyors. Confirm the contractor's registration and insurance in writing before you sign.
Rural work
Hardstands and shed floors on acreage carry trucks, machinery and stock. Base and drainage matter more than finish. Lodge a free Before You Dig Australia (BYDA) enquiry, and locate private water lines and any on-site wastewater system yourself, as they may not appear in a BYDA response.
Have plans? Get a fast quote.
Frequently asked questions
Can you find concreters for owners corporation work?
Yes. Send the property address and scope, and ask the concreter for the insurance documents the manager needs.
What thickness for a car park?
It comes from the engineer, based on traffic and ground. Light vehicle areas are often 125mm to 150mm with designed reinforcement.
Do I need council approval for a second crossover on a commercial site?
Yes. A new crossover needs written approval, and the council's policy sets minimum spacing between crossovers on one property.
Can pours happen outside business hours?
Often, to work around tenants and traffic. It adds cost, so mention it when asking for quotes.