What concreting costs in the City of Melton
Updated November 2026

These are published 2026 guide ranges for greater Melbourne. They were not re-surveyed against City of Melton quotes, and not every source says whether GST is included, so ask each concreter to state the GST position. Use the ranges to check a quote is in the right territory, then compare quotes on what they include.
Per square metre, laid
- Plain grey concrete: around $75 to $150
- Coloured concrete: around $95 to $200
- Exposed aggregate: around $120 to $220
- Stencilled or stamped: around $100 to $160
- Resurfacing existing sound concrete: around $50 to $90
Whole jobs
- A typical driveway: often $5,000 to $15,000
- A double garage, granny flat or large shed slab: commonly $4,000 to $10,000
- Small paths and pads: often a minimum charge, because the truck and crew cost about the same for a small pour
Price factors specific to the City of Melton
The crossover is plain. Melton City Council's crossover policy says crossovers must be plain concrete or match the existing footpath where a footpath is present or likely to be built. If your driveway is exposed aggregate or coloured, the crossover will usually be priced separately as plain concrete. That can make a decorative driveway slightly cheaper than a quote that assumed decorative concrete to the kerb.
Council paperwork. A new or modified crossover needs written approval from the council. The council's engineering applications page says there is no cost to submit a variation to crossover application and that assessment can take up to ten working days. A separate works within road reserve application, lodged at least ten working days before the works start, carries its own fees. Ask who lodges what, and whether the fees are in the quote. Council processes and fees change, so the concreter should check the current position.
The first crossover on a new estate. Building the first standard crossover in the spot shown on the estate's approved engineering plan skips the variation approval under the council's policy, but still needs consent to work in the road reserve.
Rock and clay. The basalt plains of Melbourne's west can turn up stones and rock during excavation, which slows the dig. The clays move with the seasons, which is why base depth, steel and joints are worth paying for.
Breaking out old concrete. On the 1970s and 1980s streets of Melton, Melton West and Kurunjang, removing and tipping the old driveway is a real cost line.
Distance and size. Acreage work at Toolern Vale, Diggers Rest and Eynesbury is often large open pours that price well per metre, offset by long driveways and access.
Estate guidelines. Some developments have a Housing Design Guideline endorsed under the planning scheme, which can include conditions on crossovers such as width. Check yours before you settle on a design.
Comparing quotes
Put the quotes side by side and compare base material and depth, slab thickness, mesh, joint spacing, how the crossover is priced and who handles the council applications. The cheapest quote often leaves one of those out.
Frequently asked questions
Do these prices include GST?
The guide ranges come from sources that do not all state a GST basis, so treat them as indicative only and ask each concreter to say on the quote.
Why is my crossover priced separately?
Because it is on council land, needs council approval and consent, and next to a footpath has to be plain concrete or match the footpath. It is a different finish and a different process from the driveway.
Who pays to fix a cracked crossover?
Under Melton City Council's crossover policy, the crossover, excluding the footpath section, is the property owner's asset to maintain.
Is a long acreage driveway cheaper per metre?
Often, because long open runs are efficient to pour. Access, base and truck movements can claw some of that back, so ask for an itemised quote.