Updated November 2026
Burnside Heights sits on the eastern edge of the City of Melton, between Caroline Springs and Taylors Hill, and it is one of the suburbs that developed from the Caroline Springs project begun in 1998. At the 2021 Census it had about 6,400 residents, with households averaging 3.6 people and four in five homes owner-occupied. Its housing is from the same late 1990s to 2010s era as its neighbours, which puts a lot of its driveways and paths at the age where joints open up and finishes wear.
Melton Concreting does not pour concrete. Your request goes to a local concreter who works Burnside Heights.
What gets poured in Burnside Heights
- Replacement driveways, often with a finish upgrade
- Patios, alfresco and pool surrounds
- Side paths and bin areas
- Repairs to cracked or sunken panels
- Garage and shed slabs
Before you book
Ask why the old concrete cracked. On the basalt clays of Melbourne's west, which shrink and swell with the seasons, water at the slab edges and thin bases are common culprits. Fixing the drainage is part of a lasting replacement.
If the crossover is staying, a neat joint at the boundary keeps it tidy. If it is being rebuilt or widened, that needs written approval from Melton City Council and consent to work in the road reserve, and next to a footpath it must be plain concrete or match the footpath.
Price guide for Burnside Heights
Guide ranges for greater Melbourne put plain concrete at around $75 to $150 per square metre laid, with decorative finishes higher and removal of old concrete extra. Ask whether GST is included. See the cost guide.
Ask whether the job needs a permit or registered builder, and check the concreter's insurance.
Frequently asked questions
How long will a new driveway last?
A well built and jointed driveway commonly lasts 25 to 40 years or more.
Should paths be replaced with the driveway?
If they are cracked or tilting toward the house, doing them together saves a second setup.
Nearby, we also cover Burnside, Taylors Hill and Caroline Springs.