Updated November 2026
Caroline Springs began as a Lend Lease development in 1998 and grew into the largest suburb in the City of Melton, with about 24,500 residents at the 2021 Census. It also seeded its neighbours: Burnside, Burnside Heights, Hillside and Taylors Hill all developed out of it. That history makes Caroline Springs the oldest of the eastern suburbs, and the place where the first builder driveways are now well into their second decade, some approaching their third.
Three quarters of homes here were owner-occupied in 2021, and nine in ten were separate houses. Concrete work is mostly upgrades and replacement: breaking out a cracked or faded original driveway, replacing paths that have tipped, and building bigger outdoor areas.
Melton Concreting does not pour concrete. Your request goes to a local concreter who works Caroline Springs.
What gets poured in Caroline Springs
- Replacement driveways, often to exposed aggregate
- Resurfacing and repairs where the slab is sound
- Alfresco slabs, pool surrounds and side paths
- Garage and shed slabs
- Shared driveways and paths for townhouse groups, which are owners corporation work
Before you book
The crossover. Under Melton City Council's crossover policy, the crossover is the owner's asset to maintain, apart from the footpath section. If yours is cracked, rebuilding it with the driveway makes sense, but it needs written approval and consent to work in the road reserve. Next to a footpath it must be plain concrete or match the footpath, so a decorative driveway changes finish at the boundary.
Why it cracked. Ask the concreter to look for the cause. On the shrink-swell clays of Melbourne's west, water at the slab edges is a common one.
Townhouses. For common property, the owners corporation manager is the starting point and will want insurance certificates and a written scope.
Price guide for Caroline Springs
Guide ranges for greater Melbourne put plain concrete at around $75 to $150 per square metre laid and exposed aggregate at around $120 to $220, plus breaking out the old slab. Resurfacing is around $50 to $90 per square metre. Ask whether GST is included. See the cost guide.
Check the concreter's insurance, and ask whether the job needs a permit or registered builder.
Frequently asked questions
Is my original driveway worth resurfacing?
If it is structurally sound, yes. If panels have cracked through or moved, resurfacing will crack with them.
Who looks after the crossover?
You do, under the council's crossover policy, apart from the footpath section.
Nearby, we also cover Burnside, Taylors Hill and Fraser Rise.