Concrete driveways in the City of Melton
Updated November 2026

A City of Melton driveway is really two jobs that meet at your front boundary. Inside the boundary is your driveway, and you choose the finish within your estate's rules. Outside it is the crossover, which runs over the nature strip to the kerb, sits under Melton City Council's crossover policy and, next to a footpath, has to be plain concrete or match the footpath. Getting both right in one quote is the point of this page. We pass your request to a local concreter who works your suburb. We are a referral service, not a concreting business.
Who is pricing driveways in the City of Melton
- New lots on the western growth front. Cobblebank, Strathtulloh, Weir Views, Thornhill Park, Aintree, Fraser Rise and Rockbank. The builder has finished the house and the driveway is next.
- Late 1990s to 2010s homes in the east. Caroline Springs, Taylors Hill, Hillside, Burnside and Burnside Heights, where original builder driveways are due for replacement or an upgrade.
- Township streets. Melton, Melton West, Melton South and Kurunjang, with driveways from the 1970s and 1980s.
- Acreage. Toolern Vale, Diggers Rest and Eynesbury, where the driveway can be long and the budget call is how much to concrete.
The crossover, in plain terms
Melton City Council's crossover policy, as published, sets out the following. Policies are reviewed, so your concreter will check the current requirements before quoting.
- A new crossover, or a change to an existing one, needs written approval from the council.
- Building the first standard crossover in the location shown on the estate's approved engineering plan, or where a planning permit already shows the location, skips that variation approval. It still needs consent to work in the road reserve.
- Where a footpath is present or likely to be built, the crossover must be plain concrete or match the existing footpath.
- The crossover, apart from the footpath section, is the property owner's asset to maintain.
- The policy limits accessway width relative to the street frontage and sets clearances to drainage pits, signs and utility assets.
The council's engineering applications page says a variation to crossover application costs nothing to submit, can take up to ten working days to assess, and does not need a draftsperson's drawing. Once a contractor is chosen, a separate works within road reserve application goes in at least ten working days before the works, with its own fees. Ask the concreter who lodges each one.
What a driveway costs
Guide pricing only. Published 2026 ranges for greater Melbourne put plain concrete at around $75 to $150 per square metre laid, coloured at around $95 to $200 and exposed aggregate at around $120 to $220. A typical driveway often lands between $5,000 and $15,000. These ranges were not re-surveyed for the City of Melton and the sources do not state a GST basis, so ask for it in writing. Get a fast quote.
Building it to last on basalt clay
The basalt clays of Melbourne's west shrink and swell as they dry and wet, and engineers have documented that movement damaging light structures and buried services. For a driveway that means:
1. Strip topsoil and soft ground, and dig to an even depth
2. Lay and compact a crushed rock base in layers
3. Set formwork with fall toward the street or a pit, away from the house
4. Support the steel mesh on chairs so it sits within the slab
5. Pour, finish and cure
6. Cut or tool control joints at the right spacing, on time
Ask how the concreter will keep water off the edges of the slab. Clay that stays wet beside a driveway is where cracks start.
Finish choices, with the boundary in mind
Plain broom finish is the most economical and grips well. Exposed aggregate and coloured concrete are popular on new homes, and on most streets they stop at the boundary, with the crossover in plain concrete. Some developments have a Housing Design Guideline endorsed under the planning scheme that adds conditions on crossovers, such as width, so read yours.
Permits and registration
Building permit requirements in Victoria come from the Building Regulations 2018 and are applied by councils and registered building surveyors. Whether a driveway needs a registered builder or a permit depends on the job, so ask the concreter to say so in writing, and check their insurance before you sign.
Ready for a price? Get a fast quote.
Frequently asked questions
Can I have exposed aggregate right to the kerb?
Usually not where there is a footpath, or one is likely to be built. Melton City Council's crossover policy requires plain concrete or a match to the existing footpath. Keep the decorative finish inside your boundary.
I am building my first driveway on a new estate. Do I need council approval?
If the crossover goes in the standard location shown on the estate's approved engineering plan, the council's policy skips the variation approval, but you still need consent to work in the road reserve. Your concreter can confirm.
How long does council approval take?
The council says a variation to crossover assessment can take up to ten working days, and the road reserve application must be lodged at least ten working days before works. Allow for both.
Who fixes a cracked crossover?
The owner. Under the council's policy the crossover, apart from the footpath section, is the property owner's asset.